Fast is never enough - to those who feel the need for speed

Meet the World Champ Kim Min-Chan's Frame / MCK Light PNP Edition

XBEE made a lot of prototype type. 

The Stretched Type is provides more grip in corners like it is on rails, and it improves acceleration as well.

For XBEE MCK Light Frame focused on Speed and Handling,  

you'll have high speed & very smooth control like you've never experience before.

MCK Light PNP Edition uses a 6Cells battery for faster flights.

Be Fast, Be Light

AirFrame weights 66g only, PNP Edtion about 255g.  

Don't have time to build one?

We build it for you!!

Each drone is built and tested to ensure you'll get a truly world class, out-of-box ready to fly FPV racer.

Preloaded PID, everyone can enjoy, from beginners to experts.

This PNP shipment from China.

This PNP drone has no receiver, prop, batteries and charger included.

You'll need your own it to fly.

Motor : Amax 2207.5 1800KV

FC : Aikon F4 2020

The Aikon F4 Mini 20x20 Flight Controller is a new generation flight controller that was designed to be compatible with the Aikon AK32PIN 4-in-1. 

All of the best features have been packed into one seamless flight experience. 

Features

• Conveniently located ESC signal ground and telemetry pads
• Quick connection cable for 4-in-1 ESCs, Works out of the box with the Aikon AK32PIN 4-in-1
• On-board voltage regulator up to 6S
• 32khz Capable
• 168mhz F4 Processor
• Software serial: SOFTSERIAL1 for VTX control
• Onboard OSD and Blackbox
• LED outputs
• Coneniently located ESC signal ground and telemetry pads
• Quick connection cable for 4-in-1 ESCs, works out of the box with the Aikon AK32PIN 4-in-1s
• On-board voltage regulator up to 6

Specifications

• Battery: 2-6s
• Mounting Holes: 20x20mm
• Firmware: Betaflight AIKONF4 Target
• MCU: STM32F405
• IMU: ICM-20602
• Blackbox: SPI 16MB
• Weight: 7g
• Hardware UARTS:
• UART1 for SerialRX
• UART3 for S.PORT
• UART4 for ESC telemetry
• UART2 available for CRSF or general use

ESC : Aikon AK32 4in1 35A 20*20

One of the most anticipated 20x20 6S ESC's from the creators of the popular Aikon AK32 30x30 4in1 ESC! 

As racers we are all striving shaving grams from our builds, With this 20x20 ESC from Aikon you will be able to shave some grams without worrying about reliability. 

Goes great with the Aikon F4 Mini 20x20 Flight controller!

Features

• BLHeli_32 firmware
• Programmable PWM frequency of up to 48KHz
• Auto-timing for higher efficiency and reliability
• Analog Voltage/Current sensing
• Adjustable “Brake on Stop” 
• Improved direction change in Bidirectional mode
• One current sensor to measure the total amp draw and telemetry functions.
• ESC Telemetry (Voltage and RPMs and current)
• Programmable sine modulation mode
• Programmable soft bidirectional mode
• Programmable autonomous periodic (every 32ms) telemetry mode
• Hardware noise filter on the signal input

Specifications

• Battery: 2-6s
• Constant: Current 35A
• Burst Current: 45A
• Mount Hole: 20*20mm
• Firmware: BLHeli32
• MCU: STM32PINF0
• Bootloader: Yes
• Weight( with/wire): 10g
• Signal wire length: 100mm
• Battery wire length: 100mm

VTX : TBS Unify Pro32 nano + TBS Unify Mounting

Specifications

• Operating Voltage: 4.5 - 5.5V
• Operating Temperature: watch for normal airflow
• Video Input Impedance: 75 Ohm
• Weight: 1g
• Antenna Connector: u.FL socket
• Video Format: NTSC/PAL
• Output Power: 14dBm (25mW), 20dBm (100mW), 26dBm (400mW)

Included

• 1x TBS UNIFY PRO32 5G8 Video transmitter
• 1x Silicone cable set (pre-tinned)
• 1x Linear whip antenna
• 1x Shrink Tube

Camera : Foxeer Arrow Micro

Antenna : Foxeer Lollipop3 RHCP / U.FL

SPECIFICATION

• Shell Material: Imported PC + ABS
• Connector : UFL
• Polarizabilty: RHCP
• Gain : 2.5Dbi
• Color : Black
• Weight : 3.6g (1 pcs)
• Dimensions : 85.5*15*85.5mm
• Center Frequency : 5750 MHz (5.8GHz)
• Bandwidth: 500 MHz (5.5 – 6.0GHz)
• Axial ratio: <3db
• Matching: VSWR <1.2 (at center frequency)
• Radiation efficiency: 98%